Set-up

Step 1. Place your EZ Wick Setter in the size container you want to wick. Loosen the thumb screw and allow the wick tube magnet to rest on the bottom of the container.

Step 2. Push the collar down, depressing the spring until it rests against the stop. While holding the collar down against the stop, tighten the thumb screw. Caution: Do not over tighten the thumb screw. Now your EZ Wick Setter is set up for that size and height container.

Operation

Step 3. Apply adhesive to the bottom of your wick tabs.

Step 4. Insert a wick into the wick tube until the metal wick tab rests against the magnet.

Step 5. Place the EZ Wick Setter in the container. While holding the EZ Wick Setter firmly and squarely on the container, depress the handle, setting the wick in the container. NOTE: It is not necessary to use excessive force when setting the wick.

Step 6. Remove the EZ Wick Setter from the container and repeat the process for the remainder of your containers.

Step 7. It's that quick and easy. Your container now has a wick that is perfectly centered and seated.